Hi, has anyone tried to flash the Shelly 1 with WLED and use it as a controller? I would like to use it as a controller for a 12V Stripe, because I can feed it directly with 12V. Here is the information I found about the PIN-Out: I had planned to connect the data line via the SW terminal (GPIO 5) with a resistor to the Shelly. I mean somewhere times have read that this has already been implemented, I find the contribution unfortunately no longer. Greetings Freund der Nacht
Other Hardware - WLED MoonModules Project
Flash WLED to ESP8266 Based Controllers : 7 Steps - Instructables
Shelly RGBW2: A WiFi LED Controller with TONS of Options for $22.
Shelly 1 SW pin (GPIO5) does not work correctly · Issue #2494 · Aircoookie/ WLED · GitHub
Setup WLED in 45 Seconds! NO TOOLS NEEDED - WLED for Beginners - 2023
Shelly RGBW2 - Shelly USA
Dig-Uno : LED Booster Board – DrZzs
Blink on startup,only with relay · Issue #812 · Aircoookie/WLED · GitHub
Richtige Hardware für WLED Projekt
WLED on a Sonoff - Part1 - Hack and Flash