Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC.

High performance audio cable designed specifically for use with turntables.  OFC wire with 100% spiral shield delivers superior signal transfer and low noise level.  Cables are hand terminated with high content silver solder.  In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire exte

High performance audio cable designed specifically for use with turntables.  OFC wire with 100% spiral shield delivers superior signal transfer and low noise level.  Cables are hand terminated with high content silver solder. 

In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6 at each end of the cable to ensure an easy connection to a chassis ground screw.  Durable and supple outer PVC jacket allows for easy cable connection and long cable life.

This version has left and right RCA plugs at both ends as well as a ground lug connection

Available in a variety of lengths and with nickel or gold plated RCA connectors

CABLE LENGTHS 

• 1 meter (3.3 ft)
• 1.5 meter (4.95 ft)
• 2 meter (6.6 ft)
• 3 meter (9.9 ft)
• 4 meter (13.2 ft)

FYI - Turntables use a magnetic cartridge and stylus to pick up the sound from the record groove.  The signal level from the magnetic cartridge is very low and must be connected to audio equipment with a PHONO level input.  When connecting a turntable to audio equipment without a phono input, an AMERICAN RECORDER VDC-141 PHONO PREAMP can be used, allowing connection to any line level input (CD, DVD, TAPE, etc.).

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low

Turntable Cable RCA to Bare End with Ground Lugs

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low noise level. Cables are hand terminated with high content silver solder. In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6 inch at each end of the cable to ensure an easy connection to a chassis ground screw. Durable and supple outer PVC jacket allows for easy cable connection and long cable life.

Turntable Cable RCA to RCA with Ground Lugs 2 Meter (6.6 ft)

Replacement RCA Cable for Dual Turntables / Record Changers / Turntable. #207301

Audioquest: Evergreen RCA + ThunderBird Groundwire Kit for Turntables —

Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC., câble rca jack audio

SUPRA Dual 6.3 mm. Jack – RCA stereo audio cable, jack rca

Cables — AMERICAN RECORDER TECHNOLOGIES, INC.

AMERICAN RECORDER RCA to RCA Turntable Cable - RCA to BARE END / 2 meter (6.6 ft)

Turntable Cable RCA to Bare End with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC.

Cables — AMERICAN RECORDER TECHNOLOGIES, INC.

Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC., câble rca jack audio

Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC., câble rca jack audio

SUPRA Dual 6.3 mm. Jack – RCA stereo audio cable, jack rca

REL T/7x Home Subwoofer with Bassline Blue 6M Cable

Turntable Cable RCA to RCA with Ground Lugs Length: 3 meter (9.9 ft) : : Electronics