Brand new premium design! Same great value! The new Autobrite Direct Foam Lance After months of research, development and testing, we are excited to announce our brand-new Autobrite Direct foam lances are finally here!!! Painstakingly developed to retain the best bits of our world-famous HD Snowfoam lance such as the a
Armour Wheel Quartz Coating is a high-performance solution designed to protect and enhance the appearance of your wheels. With a solids content of 76% (SiO2) and a formula that's specifically engineered to resist heat and heavy abuse, this coating provides superior protection against brake dust and buildup. The coating's advanced composition creates a long-lasting barrier that repels contaminants, making maintenance and cleaning of your wheels easier and more convenient.
The versatility of Armour Wheel Quartz Coating is another major benefit, as it can be safely applied to an array of wheel finishes, including anodized, chrome, painted, powdercoated, clear-coated aluminum, and matte finishes. This allows for maximum compatibility with various types of wheels, ensuring that you can enjoy the protection and benefits of the coating no matter what type of wheels you have.
Armour Wheel Quartz Coating provides a durable layer of protection that can last for over 15,000 miles or 1+ year, depending on driving conditions. Choose Armour Wheel Quartz Coating for a reliable and low-maintenance solution for maintaining the appearance and protection of your wheels.
What's Included:
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the wheel surface using Armour Detail Supply Wheel Cleaner, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. If swirl marks, or scratches are present, polish the paint to reduce any surface defects and create maximum gloss.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour Wheel Coating!
Application:
1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way.Â
2. Apply Armour Wheel Coating one wheel at a time. Apply using a methodical back and forth or crosshatch motion making sure to have even coverage. Allow the product to “set up†for 1-3minutes depending on temperature/humidity (generally 1-2 minutes). Look for light hazing to appear before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per wheel.
4. Use a fresh side of the towel every wheel.Â
We highly recommend applying 2 layers for maximum benefits and durability. If you wish to apply multiple layers allow 1-2 hours between layers.
After Care:
Allow product to sit 12 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY or Ceramic Spray Sealant to protect the coating during its initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.
Armour Quartz Coating is the new standard in ceramic protection, with a solids content of 66% (SiO2) at a purity of 99.9%, Armour Coating leads the way in consumer-available protective coatings in only a single layer!
The advanced formula of Armour Quartz Coating offers extreme chemical resistance and a level of gloss that is off the charts. The user-friendly application process ensures that even those with limited experience can achieve professional results, and the high water contact angles make maintaining the surface of your vehicle easier and safer. The increased resistance to stains, bugs, sap, etching, and scratches means that your vehicle will be protected from a variety of potential threats, and the exceptionally slick-to-the-touch surface helps repel dirt and maintain a clean appearance.
The versatility of Armour Quartz Coating is unparalleled, as it can be safely applied to all painted, chrome, and plastic trim surfaces. With a real-world protection of 3+ years in a single layer, the coating provides a long-term solution for protecting your vehicle and keeping it looking its best. Whether you are a seasoned professional or a first-time user, Armour Quartz Coating is the ideal choice for anyone looking to enhance the appearance and protection of their vehicle.
What's Included:
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the paint surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. If swirl marks, or scratches are present, polish the paint to reduce any surface defects and create maximum gloss.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour Quartz Coating!
Application:
1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way.Â
2. Apply Armour Coating 1-2 panels at a time. Apply using a methodical back and forth or crosshatch motion making sure to have even coverage. Allow the product to “set up†for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for uniform small sweat beads to appear before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.
4. Halfway through the vehicle or as the applicator starts to harden, flip the applicator over to a fresh side.
5. Use a fresh side of the towel every other panel.Â
Armour Quartz Coating was designed as a single layer coating, however, it can be layered. If you wish to apply multiple layers allow 1-2 hours between layers.
After Care:
Allow product to sit 12 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY or Ceramic Spray Sealant to protect the coating during its initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.
Introducing Pilot, a meticulously crafted all-in-one solution for interior care and protection. Designed to be the optimal choice for cockpit care, Pilot caters to the discerning needs of automotive enthusiasts. Engineered to excel on all interior surfaces, from hard plastics and piano trims to chrome, fabric, leather, vinyl, alcantara, screens, and even glass!
Experience the sophistication of Pilot as it gently produces a light foaming effect upon application, effortlessly lifting away contaminants while ensuring a streak-free finish. Notably, Pilot leaves no room for compromise—devoid of silicones and dyes, it imparts a matte OEM appearance, preserving the elegance of your vehicle's interior.
Pilot is more than a cleaner; it's a guardian against the elements. Formulated with an active UV absorber, odor encapsulant, and anti-static properties, Pilot is your comprehensive shield against environmental factors. The inclusion of the Active Ingredient Benzalkonium Chloride (BZK) underscores its commitment to true cleanliness.
For those who demand the epitome of interior detailing in a single bottle, Pilot awaits!
Application:
1. Apply Pilot by spraying it directly onto your microfiber towel or on the surface itself, then gently wiping/agitating the surface.
2. Watch as Pilot flashes to a streak-free finish. To ensure the best results on glossy trims, screens, and glass, flip to a clean side of the towel or use a separate towel for the final wipe.
3. It really is that easy, it’s almost too good to be true!
4. For heavier cleaning needs liberally spray directly onto the surface allowing a slight dwell time for emulsification and agitate with a detailing brush.
Armour PRO Quartz Coating is available to consumers, however, we are providing a top tier professional coating on the consumer level. To gain access to Armour PRO each applicant will go through a quick vetting process to determine their readiness for this level of coating. Please contact us prior to purchasing
Armour PRO Quartz Coating is the epitome of high-performance protective coatings, delivering unparalleled protection in a single layer application. With a solids content of 87% (SiO2) at a purity of 99.9%, the coating provides the highest level of protection available to consumers.
The advanced formula of Armour PRO Quartz Coating creates an extremely hard and resistant layer that protects your surfaces from stains, bugs, sap, etching, and scratches. The exceptional slickness of the surface helps repel dirt, making maintenance of your vehicle effortless and safe. The coating can be applied as a single layer, or as a base layer for the standard Armour Coating for added benefits such as increased slickness, gloss, self-cleaning, and extreme hydrophobic properties.
With real-world protection of 5+ years in a single layer, Armour PRO Quartz Coating offers an unparalleled solution for enhancing the appearance and protection of your vehicle. Whether you are a seasoned professional or a DIY enthusiast, the coating's top-of-the-line formula and user-friendly application process make it the ideal choice for anyone looking to take their vehicle protection to the next level.
What's Included
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the paint surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. If swirl marks, or scratches are present, polish the paint to reduce any surface defects and create maximum gloss.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour PRO Quartz Coating!
Application:
1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way.Â
2. Apply Armour PRO Coating 1 panel at a time. Apply using a methodical back and forth or crosshatch motion making sure to have even coverage. Allow the product to “set up†for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for light hazing to appear before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.
4. While using Armour PRO, you will need to switch to a fresh side on your applicator every 3-4 panels, as the coating is so concentrated, it starts to cure hard in the applicator.
5. Use a fresh side of your removal towels every other panel. You may need 2 (1st wipe) towels when using Armour PRO.
Allow 1-2 hours if you choose to layer Armour Quartz Coating on top of the Armour PRO Coating.
After Care:
Allow product to sit 12 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY or Ceramic Spray Sealant to protect the coating during its initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.
Introducting Decon Soap, a specially formulated shampoo that offers heavy-duty cleaning for your vehicle. Made with biodegradable ingredients and degreasing agents with PH of 11, it is designed to break down old protection and remove various types of contaminants such as dirt, grime, bugs, and stains.
The high-foaming formula of Decon Soap provides exceptional cleaning power, making it suitable for use with a foam cannon or in a two-bucket wash. The unique blend of high alkalinity degreasing agents and surfactants in this shampoo ensures that it is safe to use on all types of surfaces, including paint, plastic, and metal.
With Decon Soap, you can start fresh for any new protection, polishing, or pre-detailing treatments on your vehicle. By effectively removing dirt, grime, and other contaminants, Decon Soap is a must-have for starting with a fresh canvas every time.
Dilution:
Foam Cannon: 3-4 oz
Bucket: 2-3oz per 3-4 gallons
Application:
1. For optimal results using a foam cannon, dispense 3-4 ounces of Decon Soap, depending on the level of stripping required.
2. Apply the foam generously to the entire vehicle and allow the product to work for 2-3 minutes to effectively break down and encapsulate dirt and any existing protection.
4. Thoroughly rinse the vehicle to remove all traces of the soap.
5. Repeat the process with a 2-bucket wash, using 2-3 ounces of Decon Soap in the bucket.
Armour Glass Coating is a premium-grade window coating solution that elevates your driving experience while maintaining the cleanliness of your glass surfaces. This cutting-edge coating features an extremely hydrophobic composition, providing exceptional resistance against water, rain, and other precipitation.
Starting to repel water at speeds of 35 mph, Armour Glass Coating eliminates the need for windshield wipers at highway speeds. The advanced formula also offers long-lasting protection, providing up to 12+ months of real-world protection on windshield glass and up to 2+ years of protection on all side and rear glass.
Armour Glass Coating is safe to use on all glass surfaces, including tempered glass snf laminated glass. This professional-level coating solution is not only highly effective in maintaining a clear view while driving in inclement weather but also helps to extend the life of your windshield wipers. With its durable and long-lasting protection, Armour Glass Coating is a must-have for all drivers looking to enhance their driving experience.
What's Included:
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the Glass surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. For best prep practice, polish the glass to promote proper bonding and remove any existing repellent coatings.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour Glass Coating!
Application:
1. After thorough prep prime the applicator with 3 lines to start and each subsequent application will only need a small amount, a little goes a long way.
2. Apply Armour Glass Coating to one section of glass at a time. Apply using a methodical back and forth motion. Allow the product to “set up” for 30 seconds-2 minutes depending on temperature/humidity. Look for uniform small sweat beads or light hazing before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave). If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per glass section.
4. Use a fresh side of the towel every other piece of glass.
We highly recommend applying 2 layers on the windshield. If you wish to apply multiple layers allow 30-60 minutes between layers.
After Care:
Allow product to sit 12 hours at minimum for initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.
Introducing Iron, a cutting-edge solution designed for the safe and efficient removal of embedded contaminants from painted surfaces of vehicles. This pH-neutral formula is specifically formulated to target harsh ferrous deposits such as rail dust and brake dust, which can cause harm to the paint surface over time if left untreated.
Iron features color-changing technology, which allows you to visually monitor the progress of the decontamination process and ensure that all contaminants are removed. Iron's unique formula contains special wetting agents that allow for a longer dwell time, resulting in superior removal of contaminants compared to similar products.
Iron is the first step in a two-part decontamination process, with the second step being the use of a Clay Mitt for mechanical decontamination. This two-step process is essential for preparing your vehicle for polishing and protecting, and is a must-have for any vehicle detailing routine. Whether you're a professional detailer or a DIY enthusiast, Iron is an essential product for achieving the best results in your vehicle detailing routine.
Application:
1. For optimal results, first ensure the surface is clean, cool, and out of direct sunlight.
2. Spray Iron directly onto the surface and allow it to react with the contaminants for 3-5 minutes.
3. Keep Iron lubricated with mists of water to ensure it does not dry on the surface.
4. Thoroughly flush away all chemical residue with a strong stream of water, ensuring removal from all crevices.
5. For heavier decontamination, spray Iron onto the panel, work the Iron into the panel using a damp microfiber towel or wash mitt.
6. Repeat as necessary.
Introducing Panel Prep, a comprehensive and highly effective solution for thorough surface preparation. The unique formulation of isopropyl alcohol, specialized degreasers, and surfactants work together to eliminate any residual compounds and polishing oils that may have been left behind from previous detailing steps, resulting in a completely clean surface that is ready for further treatment. The inclusion of a sophisticated foaming agent not only provides a smooth and effortless application, but also acts as a lubricant to minimize the risk of swirling or any other forms of marring during the preparation process.
As the first and crucial step in any surface protection routine, Panel Prep ensures that the subsequent waxing, sealing, or coating steps will be able to perform at their maximum potential. The ability of Panel Prep to clean and prepare surfaces thoroughly, in combination with its user-friendly formula, makes it an essential tool for both professional detailers and DIY enthusiasts alike.
Whether you are looking for your true finish during polishing or simply ensuring the longevity of your paint's protection, Panel Prep is an indispensable part of your detailing arsenal.
Application:
1. For optimal results, spray Panel Prep evenly onto the desired surface and allow it to dwell for 15-30 seconds to effectively dissolve unwanted oils.
2. Wipe the surface with a short nap towel until it is clear, flipping the towel or using a secondary towel for a final wipe.
3. To avoid overspray, be sure to wipe surrounding areas as well.
4. Repeat as necessary until surface oils or protection have been removed.
Brand new premium design! Same great value! The new Autobrite Direct Foam Lance
After months of research, development and testing, we are excited to announce our brand-new Autobrite Direct foam lances are finally here!!!
Painstakingly developed to retain the best bits of our world-famous HD Snowfoam lance such as the amazing foam production, durability and ease of use, whilst introducing new and exciting features to bring it bang up to date!!
Why this lance?
An essential product! Foam lances are a multi-purpose tool, not just for snowfoam! Citrus Wash, Top-Gloss, and Magiseal are all great products that can take advantage of foam lance application.
Your foam lance your choice! Use the dilution control to adjust your foam thickness, alter the 2 different nozzle adjustments to adjust the fan spray axis from vertical to horizontal and adjust the flow intensity. Allowing you to be in full control of your foam coverage.
Key Features
The Autobrite Woollen Wheel Mitt is the perfect way to gently and effectively clean the delicate finish on modern alloy wheels. It’s natural lambs wool construction allows for a safe, swirl free clean on even the softest of paint finishes.
It’s Compact design allows for a snug fit over your fingers, this gives you a far more tactile experience than a traditional brush making cleaning the backs of spokes easier and more efficient.
In the Detailing world today there have always been some concerns about using acidic wheel cleaners. Some swear by acid cleaners, some not. Very Cherry acidic wheel cleaner is a powerful dilutable wheel cleaner that will break down even the heaviest of dirt and contamination on wheel surfaces.
Acid wheel cleaners can be a valuable tool in your detailing arsenal. Very Cherry Acidic wheel cleaner is a powerful acid-based cleaner. This cleaner rapidly breaks down the heaviest of brake dust, tarnish, rust, grime and dirt in minutes! The addition of carefully selected brightening agents and powerful cleaning agents ensures wheels are kept looking at their best. It is safe to use on plastic wheel trims, clear coated and painted alloy wheels. It removes rusty buildup, dirt, and heavy brake dust rapidly and thoroughly and can transform even the most neglected wheels.
VCA will dilute up to 20-1 and can be used in stronger concentrations for heavier contamination.
Foam Cannon Pro and Foam Cannon S are new generation Foam Cannons, powered by MJJC’s new generation foam technology. This new technology is stronger and creates more, thicker foam with less soap, even with smaller pressure washers. They have a better connection system. This allows them to attach to your pressure washer easily, and makes changing attachments easier and faster.
Simply put, they are better, stronger, and save you soap, while creating more foam, making it easier and quicker to foam your vehicle.
Please note regarding connectors. If you have a short trigger gun, you will need to 1/4 quick release option from the drop down menu.
If you have a Kranzle Pressure washer, please check whether your connector is a D10 or D12 and select accordingly from the drop down menu.
If you have a Nilfisk domestic pressure washer (C/E/P series) you will either need the Gerni/New Nilfisk connector if your pressure washer was purchased within the last 2-3 years. For older machines, please purchase the Nilfisk/Kew/Alto option.
If you have an AVA Pressure washer, unfortunately this item is NOT compatible with your pressure washer
Först Citrus Pre Cleaner / Pre Wash
The first choice for dirtier jobs.
If your car is really filthy or needs a bit of a spring clean, strip off heavier contamination with Först, our citrus Traffic Film Remover (TFR).
Natural orange oil within the formula doesn’t just boost cleaning – it smells great, as well.
How To Use Citrus Pre Cleaner / Pre Wash?
in2Detailing GEN 2 DA8 Dual Action Machine Polisher **Now Supplied with both 5 (125mm) and 3 (75mm) Backing Plates
Overview:
in2Detailing is please to release it's new Dual Action machine polisher that is similar to the well know DAS 6 Pro. The machine still features a market leading 900W motor however internally it is not the same motor found in the DAS 6 Pro (similar to how 2 car manufacturers can have a 2 Litre Diesel Engine that are not the same).
Aside from the internal motor modifications there have been a couple of slight changes to the exterior shell aswell. Firstly the easily identifiable front rubber grip that offer an easy to grip, comfortable way for users to hold and manoeuvre the machine. Secondly the body is slightly slimmer, so in our opinion a bit nicer to hold. Lastly, the vents have been repositioned to keep the temperatures of the machine down whilst polishing.
The machine still comes with a 6 Metre heavy duty rubber cable as well as a new vented 5 inch backing plate to offer better cooling to the pads. A 3 inch backing plate is also provided allowing you to tackle more areas from this single machine. As an added bonus we have had some great quality carry bags manufactured to you can transport the machine with ease
Specifications
- Power Consumption: 900 watts
- Operating Voltage: 240 VAC, 50-60Hz
- Lifting speed: 2500-6800 min-1
- Weight: 2.3kg
- Cable length: 6m
- Polierhub (throw): 8 mm
- Thread connection: 5/16 -24
- Backing Plate diameter: 125 mm and 75mm
- Certified by: CE
Contents:
- GEN 2 Dual Action Machine Polisher
- D handle
- Velcro backing pad 125 mm and 75mm
- Allen key for Velcro pad
- Carry Case
- Spare set of Carbon Brushes
Speed control:
- Level 1-2: Apply wax or sealant
- Level 3-4: Polishing of the vehicle, for minor to medium defects
- Level 5-6: Removing deep scratches or defects
PLEASE NOTE - DISCOUNT CODES WILL NOT WORK ON THIS PRODUCT
Detailing Kingdom Next Cut 1.1 - 500ml/4 Litre
Detailing Kingdom Next Cut 1.1 has been designed from the ground up with the latest compound technology. Next Cut 1.1 is a water based diminishing abrassive compound utilising a homogenous grain that has been specifically designed to be used on hard and soft clear coats. It can eliminate deep scratches (P1500) and due to the diminishing abrassives, will also leave a high gloss finish. To further enhance the finish we recommend following with Next Cut Finale.
On softer paints where some users can experience 'stickiness' due to heat build up, we recommend spraying the pad with Detailing Kingdom Celebrate which will not only help to reduce the temperature but will also act as a lubricant.
Next Cut 1.1 has been designed to produce little to no dust and polish residue can be removed with absolute ease. It really is quite a unique compound.
For an exhnaced finish as a one step compound on minor defects, Next Cut 1.1 can be combined with FDT or FDC. For this, users would add 4 pea size drops of Next Cut 1.1 and 2-3 of FDT or FDC and polish as usual. The finish will be extremely glossy and protected.
Next cut 1.1 contains no silicone or fillers and is bodyshop safe
Detailing Kingdom Next Cut Finale - 500ml/4 Litre
Detailing Kingdom Next Cut Finale is a water based diminishing abrassive anti-hologram polish. Next Cut Finale can be used to further exhance the finish after polishing with Next Cut 1.1 or Next Cut 3.3. Next Cut Finale can also be used to remove light defects such as 5000 grit sanding marks, fine microscratches, and swirl marks.
Next Cut Finale has been designed to produce little to no dust and polish residue can be removed with absolute ease.
We recommend following Next Cut Finale with Detailing Kingdom FDT or FDC sealant to protect the finish and make it easier to clean.
Next Cut Finale contains no silicone or fillers and is bodyshop safe
AUTOBRITE DIRECT HD *NEW 2023* SNOW FOAM LANCE 1/4 QUICK RELEASE+500ML MAGIFOAM
Snow Foams & Snow Foam Lances, Exterior Cleaning
Best snow foam lances 2021/2022
Autobrite Direct Snow Foam Lance
Snow Foams & Snow Foam Lances, Exterior Cleaning
Best Snow Foam Lance of 2021
DETAIL PRODUCTS - February 2023 - Auto Laundry News
Heavy Duty Snow Foam Lance - Premium Quality With Full Brass Internals
Auto Finesse Foam Lance V2 – Auto Finesse USA
Best Snow Foam Lance of 2021
Best snow foam lances 2021/2022
Snow Foams & Snow Foam Lances, Exterior Cleaning
AUTOBRITE Direct SNOWFOAM Lance 1/4 INCH Quick Release : Automotive, lance fm ao vivo