Por un escritor de hombre misterioso
Explore the full range of official Arduino products including Boards, Modules, Shields and Kits, for all ability levels and use cases.
Stylishly designed in white & teal with an aluminum shell and logo, this 1M cable type A/B will boost your Arduino projects making it perfect for all your electronics needs.
Stay connected in style!
- 100 cm
- Aluminium shell with logo
- Nylon braided jacket white and teal
It's white&teal, so it's really gonna pop - plus it's got a nylon braided jacket to keep your cords safe.
Arduino users rejoice! This is the cable you've been looking for.
- 100 cm
- Aluminium shell with logo
- Nylon braided jacket white and teal
Breadboard 1 pin dual-male jumper wire 75pcs pack.
The pack comes with 2 different lengths: 200mm (25pcs) and 100mm(50pcs).
Perfect design and adequate quality for breadboard and Arduino connection, you can use it over and over again!
These are a long flexible jumpers wires of 150 mm with a male connectors on the ends. They are perfect to use to make projects with your Arduinos and breadboard.
Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping.
50 cm cables
Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping.
30 cm cables
With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (like the Arduino MKR family).
In fact, this cable turns the 4 pin JST connectors of the atmospheric sensors into 4 male jumper pins that you can connect to any microcontroller.
The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.
USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m
This cable is needed to connect your PC to a board that uses this kind of connector.
4 wires intended for ground and 4 for signals.
Color coded to match Saleae software (channels 4-7)
Total length is 0,8 meter (31,5)
No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.
Saves time and frustration during development, verification and repairs.
The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.
The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.
These probes are perfect for those who already has a metal base plate and holders which is a must for the function.
INCLUDED:
4×SP10 probes with pin tipped test needles
4x Extra crown tipped test needles
5x Dupont to dupont test wires
2x Banana to dupont test wires
Now you can connect your Arduino boards with the official Arduino USB Cable. Through a USB-C® to USB-C with a USB-A adapter connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
The Arduino USB Cable has a nylon braided jacket in white and teal, so that you can sport the Arduino colors even when you are hooking up your electronics. The connectors have an aluminum shell that protects your cable from harm at the same time as looking stylish.
- 100 cm
- Aluminium shell with logo
- Nylon braided jacket white and teal
Ideal for use with experimental boards!
Ideal for use with experimental boards!
The wires are separable for ease of use.
40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end.
Ideal for use with experimental plates.
The AC7042 USB-C 3.2 Gen1 4K Multiport Dock turns a notebook into a complete work station by connecting only one flexible USB-C cable.
This multiport dock extends the notebook with a 4K monitor via HDMI, Gigabit Ethernet connection, three USB-A ports and a USB-C pass-through charging port with power delivery (max. 60W) support. This solid aluminium multiport dock is USB powered, no external power supply is needed. Please make sure the USB-C port of the notebook supports DP Alt Mode.
Turn a notebook into a work station with only one foldable USB-C cable
Connect one 4K@30Hz monitor to the notebook via the HDMI port of the AC7042. The Multiport Dock has a Gigabit LAN networking port and extends the notebook with three additional USB-A 3.2 Gen1 ports. The flexible cable can be stored into the dock.
- Connect your notebook with USB-C to a 4K@30Hz HDMI monitor/TV
- 3x USB-A 3.2 Gen1 and 1x Gigabit ethernet port
- USB-C Pass-through port with power delivery support to provide the correct power and current for your notebook
- Solid aluminium design with foldable USB-C cable
- USB powered; Plug and Play: A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) is needed
The USB-C Hub with 4 USB-A ports 3.2 Gen1 (USB 3.0) Hub connects all your computer peripherals, USB sticks and external hard drives with a USB-A port to your laptop with USB-C.
The USB-C Hub 3.2 with 4 USB-A ports is a plug and play device and is powered by your laptop's USB port. No additional power supply is needed.
- Use your USB-A peripherals on your USB-C device
- Plug and play on every USB-C port, no additional power supply needed
- Compact design and light-weighted: easy to take along
- Supports USB SuperSpeed (5Gbps) and is backwards compatible with USB 2.0 specifications
The complete solution for holding and measuring your circuit board.
PCBite is the perfect tool for handling your PCB during the design process. Powerful magnets combined with a stainless steel base plate provide flexibility, mobility and user-friendliness. The holder can easily be relocated to deal with printed circuit boards of different shapes and sizes. The probe is sturdy yet flexible and can be used for immediate measurements or totally hands-free operations with your multimeter or another preferred tool.
It comes with the great PCBite holders, which are very useful to fasten a PCB for soldering, rework or analysis.The metal plate has a mirror finish which helps to see the bottom part of the board you're working on. The probes come with a very precise gold needle tip. The tip contains a spring like a pogo pin, as a result, it keeps an equal amount of pressure on the board and does not move if there are vibrations or if you carefully move the board around.
With each probe, there is also a different needle with a crown tip. This alternative tip is more like a really tiny fork to be placed on small wires and pins. Additionally, there are two pin headers attached to the probe, which makes it very easy to connect them to any kind of equipment.
INCLUDED:
- 4× PCBite holder
- 1× Large Base plate (A4)
- 4× SP10 probes with pin tipped test needles
- 4x Extra crown tipped test needles
- 1x Set of yellow insulation washers
- 5x Dupont to dupont test wires
- 2x Banana to dupont test wires
- 1x Micro fiber cloth
Now you can connect your Arduino boards with the official Arduino USB Cable. Through a USB-C® to USB-C with a USB-A adapter connection, this data USB
Arduino USB Type-C® Cable 2-in1
Voice-recognition-module Microphone Dupont With Jumper-wire Speech For Arduino - Integrated Circuits - AliExpress
DIYables USB Cable for Arduino Uno Mega, USB 2.0 Cable Type A/B, 2 Pieces : Electronics
Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer. Cable lenght is approximately
USB 2.0 Cable Type A/B
Buy Jumper Wires for Breadboard/Arduino and Jumper Cable Online - page 1
40 colored male-male jumper wires — Arduino Online Shop
Buy Jumper Wires for Breadboard/Arduino and Jumper Cable Online - page 1
Pack of 50 female-female jumper wires in various colors — Arduino Online Shop
Online Shopping - Arduino Breadboard Jumper Cable Wire Kit M-M
Arduino Official Store Boards Shields Kits Accessories
NFC/RFID reader with two transponders — Arduino Online Shop
Arduino® UNO R4 WiFi — Arduino Official Store
DIYables USB Cable for Arduino Uno Mega, USB 2.0 Cable Type A/B, 2 Pieces : Electronics
Home Automation — Arduino Online Shop