Por un escritor de hombre misterioso
An electrical device that changes the luminous flux of the light source in a lighting device and adjusts the illumination level. The device with large capacity and constituting the system is called dimming device. Its basic principle is to change the effective current value of the input light source to achieve the purpose of dimming.Dimmer: Dimmer in English The purpose of the dimmer is to adjust the different brightness of the light. The light output of different intensities generated by the average power light by reducing or increasing the RMS voltage. Although variable voltage devices can be used for a variety of purposes, this regulation is intended to control lighting.The scope of the dimmer is: small units of normal size light switches are used for home lighting, and high-power units are used for large theater or building lighting facilities. Small unit dimmers are usually directly controlled, while high power units use remote control systems. Modern professional dimmers generally use digital control systems like DMX or Ethernet.In professional lighting industry, the change of intensity is called \"disappearance\", which can be \"disappearance\" or \"disappearance\". Dimmers directly and manually control the limit of quantity. Their speed can be different, but this problem has been basically eliminated in modern digital forces (although the brightness change at a very fast speed may still avoid affecting the bulb life for other reasons).Modern dimmers are built by thyristor rectifiers (1373), not potentiometers or varistors, because they have higher efficiency. The variable resistor will dissipate heat (0.5 low efficiency). Through switching and closing, the silicon controlled rectifier is not hot in theory (the efficiency is close to 1.0).Historical developmentThe first recorded dimmer is the \"safety dimmer\" by Wiewood, which was published in 1890. Before that, the dimmer might cause a fire. Early dimmers were large dimmers that directly controlled the operation manual, which meant that all power came through the lighting to control the location, which could be inconvenient and potentially dangerous, especially with the system having a large number of channels, high-power lights or both (such as a stage dance hall or other similar venues).When the silicon controlled dimmer is put into use, it is feasible to simulate the remote control system (usually the lighting control system at 0 - 10V). Compared with the heavy power cable lighting system in the past, the control system of this line is much smaller (low current and lower risk). Each press has its own control line, which means that a large number of wires leave the lighting control position and operate in various shades. Modern systems use digital control protocols, such as DMX512, ETCnet, or ETCnet2 [1], to control a large number of dimmers (and other stage equipment) through a single cable.In 1961, Joel Pilar, the founder of Lucheng Electronics, invented the first solid-state dimmer. Its current switch is closed 120 times per second to save energy, and allows the dimmer to be installed in a standard electrical installation box.
Generic Dimmer LED 220V 230V 110V AC Triac Wireless Wifi @ Best Price Online
Generic 220V 230V 110V AC Triac LED Dimmer Wireless RF @ Best Price Online
Titan Controls® Mercury® 4 - Multi-Function Fan Speed Controller
220V TUYA WiFi AC Triac Dimmer LED Lamp Switch Module Wireless RF Remote Control
110V-220V 220V-240V Max. 300W Triac and Linear Foot Slide LED Dimmer Switch with Push Button Control on off Function Widely Using for Floor Lamp - China LED Lamp Dimmer Switch, Foot Dimmer
Wholesale wifi dimmer 230v ac for Trendy and Adjustable Lighting
Dimmer LED 220V 230V 110V AC Triac Wireless Wifi RF Dimmable Push Switch with 2.4G
Titan Controls® Helios® 11 - 4 Light 240 V Controller with Trigger Cord
220V Wireless AC Triac LED Dimmer Switch + 2.4G RF Brightness Remote Control Set